Riders First
Training Operations
FIELD TOOLS
Choose a tool
Built for fast use on iPad and iPhone, with large touch controls and high outdoor contrast.
Riders First T-CLOCS Fleet Inspection
Up to Up to Up to 13 motorcycles grouped under one selected training location
Fleet progress: 0 of 13 motorcycles have a final status.
Not completed
| T-CLOCS Item | What to Check | What to Look For | Result | Notes |
|---|---|---|---|---|
| T - TIRES & WHEELS | ||||
| Tires | Condition | Tread depth, wear, weathering, evenly seated, bulges, embedded objects. | ||
| Tires | Air Pressure | Check when cold, adjust to load. | ||
| Wheels | Spokes | Bent, broken, missing, tension; “ring” = OK, “thud” = loose spoke. | ||
| Wheels | Cast | Cracks, dents. | ||
| Wheels | Rims | Out of round/true = 5 mm. Spin wheel and index against stationary pointer. | ||
| Wheels | Bearings | No freeplay between hub and axle; no growl when spinning. | ||
| Wheels | Seals | Cracked, cut or torn; excessive grease outside; reddish-brown around outside. | ||
| Brakes | Function | Each brake alone keeps bike from rolling. | ||
| Brakes | Condition | Check pads and discs for wear. | ||
| C - CONTROLS | ||||
| Handlebars | Condition | Bars straight, turn freely, handgrips and bar ends secure. | ||
| Levers & Pedal | Condition | Broken, bent, cracked, mounts tight, ball ends present, proper adjustment. | ||
| Levers & Pedal | Pivots | Lubricated. | ||
| Cables | Condition | Fraying, kinks, lubrication at ends and interior. | ||
| Cables | Routing | No interference or pulling at steering head or suspension; no sharp angles; supports in place. | ||
| Hoses | Condition | Cuts, cracks, leaks, bulges, chafing, deterioration. | ||
| Hoses | Routing | No interference or pulling at steering head or suspension; supports in place. | ||
| Throttle | Operation | Moves freely, snaps closed, no revving when handlebars are turned. | ||
| L - LIGHTS & ELECTRICS | ||||
| Battery | Condition | Terminals clean and tight, electrolyte level, held down securely. | ||
| Battery | Vent Tube | Not kinked, routed properly, not plugged. | ||
| Headlamp | Condition | Cracks, reflector, mounting and adjustment system. | ||
| Headlamp | Aim | Height and right/left. | ||
| Tail/Brake Lamp | Condition | Cracks, clean and tight. | ||
| Tail/Brake Lamp | Operation | Activates upon front brake/rear brake application. | ||
| Turn Signals | Operation | Flashes correctly: front left/right and rear left/right. | ||
| Switches | Operation | Engine cut-off, hi/low beam and turn signal switches function correctly. | ||
| Mirrors | Condition / Aim | Cracks, clean, tight mounts and swivel joints; adjust when seated. | ||
| Lenses & Reflectors | Condition | Cracked, broken, securely mounted, excessive condensation. | ||
| Wiring | Condition / Routing | Fraying, chafing, insulation; not pinched; looms/ties in place; connectors tight and clean. | ||
| O - OIL & OTHER FLUIDS | ||||
| Levels | Engine Oil | Check warm on center stand on level ground, dipstick or sight glass. | ||
| Levels | Gear Oil / Shaft Drive | Transmission, rear drive, shaft. | ||
| Levels | Hydraulic Fluid | Brakes, clutch, reservoir or sight glass. | ||
| Levels | Coolant | Reservoir and/or recovery tank; check only when cool. | ||
| Levels | Fuel | Tank or gauge. | ||
| Leaks | Engine Oil | Gaskets, housings, seals. | ||
| Leaks | Gear Oil / Shaft Drive | Gaskets, seals, breathers. | ||
| Leaks | Hydraulic Fluid | Hoses, master cylinders, calipers. | ||
| Leaks | Coolant | Radiator, hoses, tanks, fittings, pipes. | ||
| Leaks | Fuel | Lines, fuel valve, carbs. | ||
| C - CHASSIS | ||||
| Frame | Condition | Cracks at gussets and accessory mounts; look for paint lifting. | ||
| Steering-Head Bearings | Condition | No detent or tight spots through full travel; check for play by pulling/pushing forks. | ||
| Swingarm Bushings | Condition | Raise rear wheel; check for play by pushing/pulling swingarm. | ||
| Suspension | Front Forks | Smooth travel, equal air pressure/damping, anti-dive settings. | ||
| Suspension | Rear Shock(s) | Smooth travel, equal pre-load/air pressure/damping; linkage moves freely and is lubricated. | ||
| Chain or Belt | Tension / Lubrication | Check tension at tightest point; lubricate side plates when hot. Do not lubricate belts. | ||
| Sprockets | Condition | Teeth not hooked, securely mounted. | ||
| Fasteners | Threaded | Tight; no missing bolts or nuts. | ||
| Fasteners | Clips & Cotter Pins | Not broken or missing. | ||
| S - STANDS | ||||
| Center Stand | Condition | Cracks, bent. | ||
| Center Stand | Retention | Springs in place, tension to hold position. | ||
| Side Stand | Condition | Cracks, bent; safety cut-out switch or pad equipped. | ||
| Side Stand | Retention | Springs in place, tension to hold position. | ||
Completed: 0 | Pass: 0 | Fail: 0 | N/A: 0